Steel belt baler common breakdown and elimination method
add time：2012-09-11
Steel strapping is strapping new advanced pneumatic packaging machine. Main specifications for steelmakers and non-ferrous metals businesses strapped for various small pipe, plates, profiles, such as product packaging, also suitable for wooden packaging strapping of various products. Used, however due to wear and tear parts, poor lubrication can cause damage to parts, potentially increasing breakdowns and accidents happen so quickly identify failures, troubleshooting is very important. Don't turn my slight hitch manufacturer to gain valuable time and money. Here are a few places prone to failure and maintenance methods. Fault: packaging machine cut a continuous steel belt. Reasons: 1) cutter wear or failure. ★ Maintenance: check whether the cutter or cutting tool wear or failure, serious wear should be replaced. Reason: 2) air pressure falls. ★ Maintenance: check if the working pressure is normal; cut off strips; check blockade operations. Breakdown II: locking joints withstand the tensile force is not enough. Cause: clamping bucks join hole or join pins wear and tear. ★ Maintenance: inspect these parts in the groove depth shallow, replace if necessary.
Pneumatic Strip Packer daily faults and maintenance
Pneumatic steel strapping for its smaller, highly mobile convenience of customers love, mainly for steelmakers and non-ferrous metals companies bundle a variety of small size pipe, plates, profiles, such as product packaging, suitable for strapping used to pack various products.
Used, however due to wear and tear parts, poor lubrication can cause damage to parts, potentially increasing breakdowns and accidents happen so quickly identify failures, troubleshooting is very important. Will not help because of the slight hitch factory, in order to win valuable time and money, Hat Yai below the company's technical staff, to introduce you to the common problems and maintenance of the balers: failure: constantly
Reasons: 1) cutter wear or failure
Maintenance: check whether the cutter or cutting tool wear or failure, such as serious wear should be replaced
2) pressure to reduce maintenance: check the baler working pressure is normal; cut strips from blocking cylinder see symptoms; check for closures operation failure: locking joints withstand rally not enough
Cause: clamping bucks mating holes or join pin worn
Maintenance: groove depth shallow check these parts, replace if necessary
