PP/PET steel with pneumatic packer is a friction welding-type baler overlap thermoplastic packing heat through friction movement joints, so called "friction welding". Pneumatic Packer job, piston under the pressure of the compressed air cylinder, piston and the vibrator to the top and PIN together, pressed the vibrator strap overlaps, its middle part has an oval hole eccentric shaft connection to the air motor, pneumatic motor to turn every 10,000 high-speed rotation, vibrator zipping movement. Die at the end of the triangle in the lower part of the strap teeth fixed, upper triangular tooth vibrators driven, intense friction. In this way, strap weld overlap overheating, when the vibration of the timer reaches the set time, weld ends. Strap upper and lower while squeezing cementation, aside for a few seconds, splice to cool, to complete the entire packaging process.
This pneumatic packing machines use should meet the requirements of external conditions, pressure needs to be 5-7BAR, trachea and require the installation of quick-connect connectors on both ends, to install the filter, to be equipped with a drain valve, filtered water discharged in a timely manner. Ensure the air hose is too small in diameter not less than 6 mm. Note that air motor lubrication, adjusting the lubrication oil Lubricator for speed.