Spring balancer seems very simple to use, but also to use method according to the following specific operation
1. According to the weight of the tools and accessories to choose appropriate specification of the spring balancer (usually is according to the weight of the steel strip packing machine, and the height of the venue, balancer has working length 1 m and 1.7 m, and so on).
2. Will the spring balancer hook hanging in jobs at the top of the strong beams or node, and pay attention to wear the same security hole in the security chain or rope connecting beam or nodes, guarantee of absolute safety in use.
3. Under the balancer of the hook with tools and reliable operation.
4. Adjust the regulation on the balancer worm, the balance of the balancer weight and the weight of the tools used are consistent, the tool to achieve balance in travel anywhere, the tools in a state of weightlessness.When clockwise to adjust balance weight are big, instead.When manufacturers supply is dispatch balance weight on the ceiling.Regulation cannot make balance weight above or below the rating.Otherwise will affect the normal operation.
5. Various specifications near the minimum weight of the balancer imbalance or trailer phenomenon is normal.
6. Remove from the balancer tool, must stop pin first pull rod, back into the groove after about 30 degrees clockwise, to lock cone, remove the tool again, in order to avoid sudden unloading hook fast back hurt or damage to the tool.After being on reload tools, can loosen the stop pin, will stop pin rod back to reset the hour hand.
7. Never in balancer did not hang up the tool, empty, empty without a cause, lest cause rope slot card dead wrong
8. When operating tools make lateral movement Angle exceeds 30 degrees, to move closer to the vertical position, then relax tool, otherwise it would be easy cause rope slot card dead wrong.
9. Vertical load should be suspended.When suspension balancer, linked insurance first chain.Turn adjusting worm, the balance of suspended objects, reverse reduce balance, consequent increase balance.Balancer is not suspended objects, do not put the empty space out, lest cause rope suddenly recycling cuts.Often examine balancer, check whether the fasteners loose, hook with and without cracks, reliable insurance chain, shell and cone should be no crack and severe wear.If not in use for a long term, should do moistureproof processing.