In working process of sealless steel strapping tool, the buckle connection sometimes need to adjust, so there is some adjstment method below:

1. According to the method of sealing tape, sealing tape unit of hex bolt to adjust the cutting depth and cutting machine available;

2. According to the location place insertsteel strapping tool;

3. loosen the two hex bolt, and use three knob to open the screw;

4. if the sealing depth is not enough, you may need to adjust the position toward the seal holder again;

5. if the sealing depth too deep, you need to adjust the seal holder toward the cover gasket .
6.to set the screw tight.

   Above is some methods from Qingdao Ausence Packing Equipment Co.,Ltd Qingdao , hope to be able to bring you some help.