Steel strapping tool is used a very wide range of packaging machines.By using strip-wound products or packages, and then press the tightening key, tighten the excess steel, the steel belt close to the product or package, then heat melting or using steel materials such as steel-band connection on both sides.So, do you know how to properly use the steel strapping tool?
No don't worry, here's a look at the methods used.

Method of use:

1, the lock set on the strapping steel strip and steel strips around the tied object after insert locked to form the upper and lower Strip, and finally the lower steel tape from locking in some 50mm-80mm folds, hand pull tight the loose strips.

2, open the gas source switching, mobile strapping machine, move it closer to the object being tied above the belt at the upper steel friction wheel (142#) and the bearing pad on wheels (175#), and strapping forward push the locking button and latch mechanism, binding preparation is complete.

3, press the valve Rod a (134#) gas motor starter drives friction wheel steel belt pull tight until the motor stops turning, is bound to have been Strip tied tightly at this time.

B 4, then press the stem (133#) the machine will automatically lock, cut work.If you pull tight to make midway down the gas motor, used her hands to pull the lock lever control lever (86#) tied the machine will automatically restore the original state.

Through the presentation, we use for steel strapping  tool has understood.Meanwhile, steel strapping is used primarily to make strip close to the bundled product or package surface, ensure transportation and storage are not scattered by the strapping is not strong, it also has the result binding trim function;Avoid placing messy, save storage space.